Author Guidelines
Table of content
Manuscript preparation | Revision Requested |After Accepted and Published |
Manuscript Preparation
Title Page Information
Title - The title should be concise, straightforward, informative, and describe the content of the article. Titles are often used in article information retrieval systems. Therefore, avoid abbreviations and formulas whenever possible. In certain cases, the title can be written in a question sentence.
Author's name and affiliation - Please clearly indicate the given name and surname of each author and check that all names are spelled accurately. Then, indicate the author's affiliation address under the name. Indicate all affiliations in lowercase superscript letters immediately after the author's name and in front of the appropriate address. Provide the full postal address of each affiliate, including the name of the country and, if available, the email address of each author. Then, add an ORCID ID, Scopus ID, or researcher ID for each author.
Corresponding author - Clearly indicate who will handle correspondence at all stages of peer-review and publication, as well as post-publication. This responsibility includes answering any future questions about the Methodology and Materials. Make sure that the email address is provided and the contact details are kept up to date by the corresponding author.
Abstract & Keywords
Text abstract - A concise and factual abstract is required (150-250 words). The abstract should state briefly the purpose of the research, the principal results, and major conclusions. An abstract is often presented separately from the article, so it must be able to stand alone. For this reason, References should be avoided, but if essential, then cite the author(s) and year(s). Also, non-standard or uncommon abbreviations should be avoided, but if essential they must be defined at their first mention in the abstract itself.
Graphical abstract - Although a graphical abstract is optional, its use is encouraged as it draws more attention to the online article. The graphical abstract should summarize the contents of the article in a concise, pictorial form designed to capture the attention of a wide readership. Image size: Please provide an image with a minimum of 531 × 1328 pixels (h × w) or proportionally more. The image should be readable at a size of 5 × 13 cm using a regular screen resolution of 96 dpi. Preferred file types: TIFF, EPS, PDF or MS Office files.
Keywords - Immediately after the abstract, provide a maximum of 6 keywords, avoiding general and plural terms and multiple concepts (avoid, for example, 'and', 'of'). Be sparing with abbreviations: only abbreviations firmly established in the field may be eligible. These keywords will be used for indexing purposes.
Main text
Introduction
The introduction of a manuscript includes a brief overview of the literature relating to the research topic. The introduction is generally written descriptively, beginning with a broad topic and slowly focusing on the work being done. An introduction usually requires several paragraphs beginning with one or two paragraphs that introduce the reader to the field of the problem under investigation in general. Then, in the next paragraph explains something more specific. The last paragraph is very important, which is what experimental questions will be answered by a study and how to do it.
The introduction of a manuscript includes a brief overview of the literature relating to the research topic. The introduction is generally written descriptively, beginning with a broad topic and slowly focusing on the work being done. An introduction usually requires several paragraphs beginning with one or two paragraphs that introduce the reader to the field of the problem under investigation in general. Then, in the next paragraph explains something more specific. The last paragraph is very important, which is what experimental questions will be answered by a study and how to do it.
Method
The research method contains a direct description of the methods used in a study. The method contains the statement of the materials used in the study, the main procedures, the techniques used in the data retrieval, and the analysis techniques. If the research uses a particular experimental design, the method part also includes the design/setup of the research. Similarly, for literature research, theoretical or modeling components are also clearly contained in this section.
The research method contains a direct description of the methods used in a study. The method contains the statement of the materials used in the study, the main procedures, the techniques used in the data retrieval, and the analysis techniques. If the research uses a particular experimental design, the method part also includes the design/setup of the research. Similarly, for literature research, theoretical or modeling components are also clearly contained in this section.
Result and discussion
The results present experimental data to the reader. The results (which are also research findings) are generally presented in tables and figures that are interesting and clear. This section of the discussion contains interpretations of research results to give meaning to the reader or provide guidance for further research. All figures and tables need further explanation to reveal the truth.
The results present experimental data to the reader. The results (which are also research findings) are generally presented in tables and figures that are interesting and clear. This section of the discussion contains interpretations of research results to give meaning to the reader or provide guidance for further research. All figures and tables need further explanation to reveal the truth.
Conclusion
The conclusion contains a summary of the research findings. Then, followed by the main points of the discussion. A general conclusion ends with a statement about how the research work contributes to the field of study as a whole.
The conclusion contains a summary of the research findings. Then, followed by the main points of the discussion. A general conclusion ends with a statement about how the research work contributes to the field of study as a whole.
Acknowledgment
This section contains a statement of funding sources for the research work. This section also contains gratitude to those who contributed to the research and preparation of the manuscripts (in an academic context).
This section contains a statement of funding sources for the research work. This section also contains gratitude to those who contributed to the research and preparation of the manuscripts (in an academic context).
References
This section lists all the references cited in the text.
This section lists all the references cited in the text.
Artwork
Presenting a Figure/Illustration
The figure is worth a thousand words. Therefore, in addition to the table, figures are the most efficient way to present the results of research. Figures must be presented with high quality/sharpness. The use of graphics/curve fitting software and its analysis is highly recommended for making graphics that can be displayed with good quality and clarity.
The figure is worth a thousand words. Therefore, in addition to the table, figures are the most efficient way to present the results of research. Figures must be presented with high quality/sharpness. The use of graphics/curve fitting software and its analysis is highly recommended for making graphics that can be displayed with good quality and clarity.
General points
- Avoid graphic plots that are too crowded.
- Use the appropriate axis.
- Symbols and data sets must be clear, easily distinguishable.
- Make sure you use uniform lettering and sizing of your original figure/artwork.
- Number the illustrations according to their sequence in the text.
- Figures should always be cited in text in consecutive numerical order.
- Figure parts should be denoted by lowercase letters (a, b, c, etc.).
- If an appendix appears in your article and it contains one or more figures, continue the consecutive numbering of the main text. Do not number the appendix figures, "A1, A2, A3, etc."
- Examples of using Figure, available in the manuscript/paper template.
Figure captions
Ensure that each figure has a caption. A caption should comprise a brief title (not on the figure itself) and a description of the illustration. Keep text in the illustrations themselves to a minimum but explain all symbols and abbreviations used.
Permissions
If you include figures that have already been published elsewhere, you must obtain permission from the copyright owner(s) for both the print and online format. In such cases, material from other sources should be used.
Tables
- Please submit tables as editable text and not as images.
- Tables can be placed either next to the relevant text in the article, or on separate page(s) at the end.
- Number tables consecutively in accordance with their appearance in the text and place any table notes below the table body.
- Be sparing in the use of tables and ensure that the data presented in them do not duplicate results described elsewhere in the article.
- Please avoid using vertical rules and shading in table cells.
- Tables should always be cited in text in consecutive numerical order.
- Examples of using Figure, available in full in manuscript/paper template.
Unit
Use the International Units system. You can find it here or here
Math formulae
Vectors and tensors should be marked clearly in the manuscript. Equation numbers should appear in parenthesis and be numbered consecutively. All equation numbers must appear on the right-hand side of the equation and should be referred to within the text. Use the following sequence of parentheses: )]}. Mathematical symbols and formulae should be typed. Particular care should be exercised in identifying all symbols and in avoiding ambiguities. The distinction should be made between the number one (1) and the letter l and between zero (0) and the letter O. If several symbols are used the author must provide a nomenclature list of these symbols and their meanings types on a separate piece of paper. All parameters must be noted in italics, except for subscripts. British Standards BS 350, 1991, and 3763 or ISO/R31 may be referred to for units, abbreviations, and symbols.
References
Citation in text
Please ensure that every reference cited in the text is also present in the reference list (and vice versa). Any references cited in the abstract must be given in full. Unpublished results and personal communications are not recommended in the reference list but may be mentioned in the text. If these references are included in the reference list they should follow the standard reference style of the journal and should include a substitution of the publication date with either 'Unpublished results' or 'Personal communication'. The citation of a reference as 'in press' implies that the item has been accepted for publication.
Please ensure that every reference cited in the text is also present in the reference list (and vice versa). Any references cited in the abstract must be given in full. Unpublished results and personal communications are not recommended in the reference list but may be mentioned in the text. If these references are included in the reference list they should follow the standard reference style of the journal and should include a substitution of the publication date with either 'Unpublished results' or 'Personal communication'. The citation of a reference as 'in press' implies that the item has been accepted for publication.
Web references
As a minimum, the full URL should be given, and the date when the reference was last accessed. Any further information, if known (DOI, author names, dates, reference to a source publication, etc.), should also be given. Web references can be listed separately (e.g., after the reference list) under a different heading if desired, or can be included in the reference list.
As a minimum, the full URL should be given, and the date when the reference was last accessed. Any further information, if known (DOI, author names, dates, reference to a source publication, etc.), should also be given. Web references can be listed separately (e.g., after the reference list) under a different heading if desired, or can be included in the reference list.
References style
ATDPA using IEEE style. Citation and reference systems must use the Reference Management System such as Mendeley, EndNote, and Zotero.
Language (usage and editing services)
Please write your text in good English (American or British usage is accepted, but not a mixture of these). Authors who feel their English language manuscript may require editing to eliminate possible grammatical or spelling errors and to conform to correct scientific English may wish to use the English Language Editing service. Articles sent in Bahasa Indonesia will be edited and translated with a fee that will be charged to the authors (proofreading costs around IDR 400,000.00 per 1000 words).
Manuscript/paper template
Manuscript/paper template of original research paper & case study
English version
Manuscript/template of a review paper
English version
Example of submission paper - A submission paper must be written with the manuscript template. It is important to understand that the author has read all the menus in the Guide for Authors before submitting manuscripts to the journal through our submission system. The following is an example of a submission paper.
Tutorial in Bahasa
How to prepare a good article? please follow this video (in Bahasa)
Revision Requested
Example of Revised Manuscript
After you submit an article, your paper will undergo a peer-review process. The editor will decide on your submission, if your paper is accepted with a revision (minor or major), you will receive comments from our reviewers. You should revise your paper carefully based on the reviewers' comments. All changes or additions must be marked with "text highlight color". The following is an example of a revised paper (highlighted).
Example of Response Letter
When you submit a revised paper, you must make a response letter and send it to the Editor along with the revised paper. The following is an example of a response letter. There is no standard format for the response letter, you can also create it in a table.
After Accepted and Published
Galley Proof
Page proofs will be sent to the corresponding author for final checking. Corrections to the proofs must be restricted to printer’s errors: any other changes to the text, in equations or grammar, may be charged to the author. Proofs should be returned to the editors within three days of receipt to minimize the risk of the author’s contribution having to be held over to a later issue. The editors do not accept responsibility for the correctness of published content. It is the author’s responsibility to check the content at the proof stage.
Promote Your Article
As soon as your article is published - Sharing and promoting your article form an important part of the research, in terms of fostering the exchange of scientific information in your field and allowing your paper to contribute to wider scientific progress. In addition, bringing your research and accomplishments to the attention of a broader audience also makes you more visible in your field. This helps you to get more citations, enabling you to cultivate a stronger reputation, promote your research and move forward in your career. This page describes how you can share your article responsibly and offers advice to help you promote it widely.
To increase the impact of your article, the following ways are recommended for you:
- Cite your article on related future work fairly. Show that your research is ongoing and that your current paper influences your future research.
- Share your data. There is some evidence that sharing your data can increase your citations. Consider posting to data-sharing websites, such as figshare or SlideShare, or contributing to Wikipedia and providing links to your published manuscripts.
- Present your work at conferences. Although conference presentations are not cited by others, this will make your research more visible to the academic and research communities. Check out these tips for making the most of your next research conference.
- Use social media. Provide links to your papers on social media (e.g., Facebook, Twitter, Academia.edu, ResearchGate, Mendeley) and your university profile page.
- Actively promote your work. Talk to other researchers about your paper, even ones not in your field, and email copies of your paper to researchers who may be interested. Create a blog or a website dedicated to your research and share it.